Hello,
If you did not format your memory card, then check whether the files are not in
hidden mode. Follow the following steps.
Step 1:
Click on the below link and download the file "AutorunExterminator"
http://en.kioskea.net/download/download-11613-autorun-exterminator
Extract it --> Double-click on "AutorunExterminator" --> Plug your mobile to the
PC now.
This will remove the autorun.inf files from your memory card and also from drives.
Step 2:
Click on "Start" -->Run --> type cmd and click on OK.
Here I assume your memory card drive letter as G:
Enter this command.
attrib -h -r -s /s /d g:\*.*
You can copy the above command --> Right-click in the Command Prompt and
paste it.
Note : Don't forget to replace the letter g with your memory card drive letter.
Now press "Enter".
Now check for your files in memory card.
Step 3:
After that, download the Malwarebytes' Anti-Malware from the below link
http://en.kioskea.net/download/download-105-malwarebytes-anti-malware
Update it --> Perform "Full Scan"
Note : Default selected option is "Quick Scan".
Good Luck.
If you did not format your memory card, then check whether the files are not in
hidden mode. Follow the following steps.
Step 1:
Click on the below link and download the file "AutorunExterminator"
http://en.kioskea.net/download/download-11613-autorun-exterminator
Extract it --> Double-click on "AutorunExterminator" --> Plug your mobile to the
PC now.
This will remove the autorun.inf files from your memory card and also from drives.
Step 2:
Click on "Start" -->Run --> type cmd and click on OK.
Here I assume your memory card drive letter as G:
Enter this command.
attrib -h -r -s /s /d g:\*.*
You can copy the above command --> Right-click in the Command Prompt and
paste it.
Note : Don't forget to replace the letter g with your memory card drive letter.
Now press "Enter".
Now check for your files in memory card.
Step 3:
After that, download the Malwarebytes' Anti-Malware from the below link
http://en.kioskea.net/download/download-105-malwarebytes-anti-malware
Update it --> Perform "Full Scan"
Note : Default selected option is "Quick Scan".
Good Luck.
